Drywall Contractor — Arlington, MA

Drywall Contractor in Arlington, MA

Wall surfaces in Arlington are mostly what the original builders put up. Arlington is heavily shaded, and north elevations grow mildew that has to be washed off before any coating. We match the substrate rather than skimming compound over it and hoping.

Services

Drywall Contractor Services in Arlington

Drywall Repair in Arlington

Holes, cracks and damaged board — Patched, taped, mudded in coats with real dry time between, textured to match, then primed.. If you want the detail, here's how we handle drywall repair in Arlington.

Plaster Repair in Arlington

Original lath-and-plaster walls — Plaster needs compatible materials, not drywall compound smeared over it, or the repair shows through the paint.. If you want the detail, here's how we handle plaster repair in Arlington.

Ceiling Repair in Arlington

Cracks, water damage and sagging — Source of the water gets confirmed first. Then remove, replace, texture-match and stain-block.. If you want the detail, here's how we handle ceiling repair in Arlington.

Popcorn Ceiling Removal in Arlington

Textured ceiling removal and skim coat — Pre-1980 texture gets tested before anything is scraped. Then skim smooth, prime and paint.. If you want the detail, here's how we handle popcorn ceiling removal in Arlington.

Other services we run in Arlington: Start from the Arlington overview.

More on this trade generally: Drywall & Plaster across our service area.

Why Aura

Allston-Based and Properly Covered

We run out of Allston and work across Greater Boston. Massachusetts HIC #193121, full liability, workers' compensation, and a two-year warranty on our workmanship.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Arlington

Tell us the scope and we will price it properly.

(617) 777-7700 Call Now Request Online
On the Ground in Arlington

What Drywall & Plaster Work Here Actually Involves

Two-families and three-deckers in East Arlington, Colonial Revivals and Victorians through the middle, and larger 1920s–1950s homes in the Heights.

Most of our drywall & plaster work here is for owner-occupants throughout, with two-family owners concentrated at the east end.

Genuine grade

Arlington climbs steeply from East Arlington to the Heights. Sloped lots change ladder footing and staging on nearly every job.

Historic core

Arlington Center holds housing dating back well before 1800, including the Jason Russell House. Old-growth wood behaves nothing like modern stock.

Dense at one end, suburban at the other

East Arlington is packed two-families; the Heights is detached houses with driveways. Two different jobs in one town.

How Wall and Ceiling Work Is Priced

Drywall, Plaster and the Difference Between Them

What drives the price

The number is driven by finish level and access, not area. A patch in a closet is quick. The same patch on a nine-foot ceiling under raking light from a window has to be feathered wide enough that no seam catches the light, and that is a different job. Older plaster work costs more than drywall because matching an existing texture takes skill that new board does not. In Arlington specifically, the work is mostly two-families down low and single-families up the hill, and real elevation change across the town shapes how we schedule and stage it.

How the work is sequenced

Cut back to sound material, back the repair so it is not floating, tape, then three coats of compound each wider than the last, sanding between. Then prime — always prime — because bare compound and painted wall absorb differently and the difference shows through the finish as flashing.

Where it usually goes wrong

The failure we see most is a patch that was sanded flat but never primed, so it reads as a dull patch through the topcoat. The second is compound applied too thick in one pass, which cracks as it shrinks. Three thin coats beat one heavy one every time, and there is no shortcut around the drying time between them.

How long it takes

Small patches are same-day plus a return for sanding and paint. Whole-ceiling work and plaster restoration run several days because each compound coat has to dry fully before the next one goes on.

Our Work

Recent Work

Painter working a corridor in an occupied building
Pale blue colonial with black shutters and columned portico after repainting
Colonial exterior and brick walkway after completion
Our Work

Before & After

Drag the handle to compare

Apartment building corridor — before Apartment building corridor — after Before After

Apartment building corridorOccupied building, worked in sequence so residents kept access throughout. Walls, ceiling, chair rail and doors.

Common Questions

Questions We Get Asked

Can you repair and paint the same day in Arlington?

Rarely. Compound shrinks as it dries and each coat needs real time — 24 hours in normal conditions, longer in summer humidity. Rushing it puts a hairline ring through your finish coat within weeks.

Why does my crack keep coming back?

Because the substrate is still moving and the repair only bridged the surface. Proper taping and feathering, or on plaster a compatible base coat, is what actually stops it.

Will the patch be visible under paint?

Not if it is textured to match and primed. Unprimed compound absorbs differently to the surrounding wall and flashes through the finish.
Get Started

Ready for Your Drywall Contractor Estimate in Arlington?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now