Pressure Washing Service — Arlington, MA

Pressure Washing Service in Arlington, MA

Nothing gets coated in Arlington before it's washed and dry. East Arlington is packed two-families; the Heights is detached houses with driveways. Two different jobs in one town. Paint does not bond to mildew, chalk or salt film.

Services

Pressure Washing Service Services in Arlington

House Washing in Arlington

Siding, trim and foundations — Removes the mildew, pollen and road salt that paint will not bond over.. If you want the detail, here's how we handle house washing in Arlington.

Deck Cleaning in Arlington

Wash and brighten before staining — Wash, then wood brightener to open the grain and pull the grey out. Stain applied over a dirty deck fails early.. If you want the detail, here's how we handle deck cleaning in Arlington.

Driveway Cleaning in Arlington

Concrete, brick and pavers — Surface cleaner rather than a wand, so there's no striping across the slab.. If you want the detail, here's how we handle driveway cleaning in Arlington.

Soft Washing in Arlington

Older wood, painted surfaces and roofing — Low pressure with a cleaning solution instead of blasting. The right call on anything fragile.. If you want the detail, here's how we handle soft washing in Arlington.

Looking at other work in the area? Start from the Arlington overview.

More on this trade generally: Pressure Washing across our service area.

On the Ground in Arlington

What Pressure Washing Work Here Actually Involves

Two-families and three-deckers in East Arlington, Colonial Revivals and Victorians through the middle, and larger 1920s–1950s homes in the Heights.

Most of our pressure washing work here is for owner-occupants throughout, with two-family owners concentrated at the east end.

Genuine grade

Arlington climbs steeply from East Arlington to the Heights. Sloped lots change ladder footing and staging on nearly every job.

Historic core

Arlington Center holds housing dating back well before 1800, including the Jason Russell House. Old-growth wood behaves nothing like modern stock.

Dense at one end, suburban at the other

East Arlington is packed two-families; the Heights is detached houses with driveways. Two different jobs in one town.

How Washing Work Is Approached

Soft Wash, Pressure Wash, and Which One Your Surface Needs

What drives the price

Access and surface type set the price. A single-storey ranch is straightforward. Three storeys of shingle with landscaping tight to the foundation needs different equipment, more setup and more protection of what is underneath. In Arlington specifically, the work is mostly two-families down low and single-families up the hill, and real elevation change across the town shapes how we schedule and stage it.

How the work is sequenced

Plants get wet down and covered before anything else happens. Then the appropriate method for the substrate — low pressure with a cleaning solution for siding and roofs, higher pressure only where the material can take it, like concrete. Then a full rinse from the top down so nothing dries with residue on it.

Where it usually goes wrong

High pressure on wood siding drives water behind the boards and raises the grain, which then needs sanding before it can take a coating. On asphalt shingle it strips granules and shortens the roof's life. The pressure setting is the whole skill — anyone can point a wand at a wall.

How long it takes

Most houses are a single day. If the wash is prep for painting, the surface then needs 48 hours minimum to dry before anything gets coated, and longer on north elevations that never see direct sun.

Our Work

Recent Work

Failing clapboard paint down to bare wood before preparation
Exterior paint failure across clapboard before scraping and priming
Pressure washing a cape exterior before repainting
Our Work

Before & After

Drag the handle to compare

Three-family exterior restoration — before Three-family exterior restoration — after Before After

Three-family exterior restorationCornice and bay-window brackets had failed with rusted flashing behind them. Carpentry repaired first, then the full envelope prepped and refinished.

Why Aura

Licensed, Insured, and Based in Allston

Family-owned contractor working out of Allston. Massachusetts Home Improvement Contractor licence #193121, general liability and workers' compensation carried on every job.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Arlington

Free written estimate, normally inside 24 hours.

(617) 777-7700 Call Now Request Online
Common Questions

Questions We Get Asked

How long after washing before you paint in Arlington?

48 hours minimum, 72 on shaded or north-facing elevations. We check with a moisture meter rather than going by feel — coating damp siding is the fastest way to a failed paint job.

Will pressure damage my siding?

It can, which is why old wood and painted surfaces get soft washed at low pressure with a cleaning solution instead. High pressure is for concrete.

Can I have washing done without painting?

Yes, plenty of people do. Annual washing removes the mildew and salt film that shortens the life of whatever coating is already on there.
Get Started

Ready for Your Pressure Washing Service Estimate in Arlington?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now