Pressure Washing Service — Back Bay, Boston MA

Pressure Washing Service in Back Bay, Boston MA

Nothing gets coated in Back Bay before it's washed and dry. Front elevations sit on the street with no setback. Most staging happens off the alley, which limits what equipment can get in. Paint does not bond to mildew, chalk or salt film.

Services

Pressure Washing Service Services in Back Bay

House Washing in Back Bay

Siding, trim and foundations — Removes the mildew, pollen and road salt that paint will not bond over.. If you want the detail, here's how we handle house washing in Back Bay.

Deck Cleaning in Back Bay

Wash and brighten before staining — Wash, then wood brightener to open the grain and pull the grey out. Stain applied over a dirty deck fails early.. If you want the detail, here's how we handle deck cleaning in Back Bay.

Driveway Cleaning in Back Bay

Concrete, brick and pavers — Surface cleaner rather than a wand, so there's no striping across the slab.. If you want the detail, here's how we handle driveway cleaning in Back Bay.

Soft Washing in Back Bay

Older wood, painted surfaces and roofing — Low pressure with a cleaning solution instead of blasting. The right call on anything fragile.. If you want the detail, here's how we handle soft washing in Back Bay.

More from us around Back Bay: Start from the Back Bay overview.

More on this trade generally: Pressure Washing across our service area.

Why Aura

Small Crew, Licensed, Fully Covered

Aura is family-run out of Allston. Licence #193121 is on file with the Commonwealth, and both liability and workers' comp are in force on every property we set foot on.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Back Bay

Estimates are written, itemised, and free.

(617) 777-7700 Call Now Request Online
On the Ground in Back Bay, Boston

What Pressure Washing Work Here Actually Involves

1860s–1890s brownstone and brick rowhouses with bay windows, ornate cornices, iron railings and original interior plaster and millwork.

Most of our pressure washing work here is for owners and condo associations in the rowhouses, most of them working within the commission process already.

Back Bay Architectural District

One of Boston's strictest. Exterior changes visible from a public way require Architectural Commission approval, including paint colours on trim, doors and window sash.

Filled land settling

Back Bay is built on fill. Interior plaster cracks along predictable lines as buildings settle, and bridging them without addressing the substrate just reopens them.

Alley-only access

Front elevations sit on the street with no setback. Most staging happens off the alley, which limits what equipment can get in.

How Washing Work Is Approached

Soft Wash, Pressure Wash, and Which One Your Surface Needs

What drives the price

Access and surface type set the price. A single-storey ranch is straightforward. Three storeys of shingle with landscaping tight to the foundation needs different equipment, more setup and more protection of what is underneath. In Back Bay, Boston specifically, the work is mostly Victorian brownstones, and Back Bay Architectural District review shapes how we schedule and stage it.

How the work is sequenced

Plants get wet down and covered before anything else happens. Then the appropriate method for the substrate — low pressure with a cleaning solution for siding and roofs, higher pressure only where the material can take it, like concrete. Then a full rinse from the top down so nothing dries with residue on it.

Where it usually goes wrong

High pressure on wood siding drives water behind the boards and raises the grain, which then needs sanding before it can take a coating. On asphalt shingle it strips granules and shortens the roof's life. The pressure setting is the whole skill — anyone can point a wand at a wall.

How long it takes

Most houses are a single day. If the wash is prep for painting, the surface then needs 48 hours minimum to dry before anything gets coated, and longer on north elevations that never see direct sun.

Our Work

Recent Work

Exterior paint failure across clapboard before scraping and priming
Failing clapboard paint down to bare wood before preparation
Pergola over garage bays on a large repainted home
Our Work

Before & After

Drag the handle to compare

Raised ranch, colour change — before Raised ranch, colour change — after Before After

Raised ranch, colour changeCrew working the transition from the original yellow. Full prep before any finish went on, garage doors and trim picked out separately.

Common Questions

Questions We Get Asked

How long after washing before you paint in Back Bay?

48 hours minimum, 72 on shaded or north-facing elevations. We check with a moisture meter rather than going by feel — coating damp siding is the fastest way to a failed paint job.

Will pressure damage my siding?

It can, which is why old wood and painted surfaces get soft washed at low pressure with a cleaning solution instead. High pressure is for concrete.

Can I have washing done without painting?

Yes, plenty of people do. Annual washing removes the mildew and salt film that shortens the life of whatever coating is already on there.
Get Started

Ready for Your Pressure Washing Service Estimate in Back Bay, Boston?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now