Pressure Washing Service — Belmont, MA

Pressure Washing Service in Belmont, MA

Nothing gets coated in Belmont before it's washed and dry. Belmont is heavily wooded and shaded elevations hold moisture and grow mildew every year. Paint does not bond to mildew, chalk or salt film.

Services

Pressure Washing Service Services in Belmont

House Washing in Belmont

Siding, trim and foundations — Removes the mildew, pollen and road salt that paint will not bond over.. If you want the detail, here's how we handle house washing in Belmont.

Deck Cleaning in Belmont

Wash and brighten before staining — Wash, then wood brightener to open the grain and pull the grey out. Stain applied over a dirty deck fails early.. If you want the detail, here's how we handle deck cleaning in Belmont.

Driveway Cleaning in Belmont

Concrete, brick and pavers — Surface cleaner rather than a wand, so there's no striping across the slab.. If you want the detail, here's how we handle driveway cleaning in Belmont.

Soft Washing in Belmont

Older wood, painted surfaces and roofing — Low pressure with a cleaning solution instead of blasting. The right call on anything fragile.. If you want the detail, here's how we handle soft washing in Belmont.

More from us around Belmont: Start from the Belmont overview.

More on this trade generally: Pressure Washing across our service area.

Why Aura

Small Crew, Licensed, Fully Covered

Aura is family-run out of Allston. Licence #193121 is on file with the Commonwealth, and both liability and workers' comp are in force on every property we set foot on.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Belmont

Estimates are written, itemised, and free.

(617) 777-7700 Call Now Request Online
On the Ground in Belmont

What Pressure Washing Work Here Actually Involves

Large Colonial Revivals and Tudors on Belmont Hill, 1920s–1940s colonials through the centre, and two-families toward the Cambridge and Watertown lines.

Most of our pressure washing work here is for owner-occupants maintaining houses they intend to keep, with high expectations on finish.

Belmont Hill scale

The Hill houses are large and detailed, with dormers, bays and extensive millwork. Prep alone runs days longer than a standard colonial.

Grade on the Hill

Sloped lots and long approaches make staging slower than the square footage suggests.

Mature canopy

Belmont is heavily wooded and shaded elevations hold moisture and grow mildew every year.

How Washing Work Is Approached

Soft Wash, Pressure Wash, and Which One Your Surface Needs

What drives the price

Access and surface type set the price. A single-storey ranch is straightforward. Three storeys of shingle with landscaping tight to the foundation needs different equipment, more setup and more protection of what is underneath. In Belmont specifically, the work is mostly colonials and hillside estates, and a hill with genuinely large houses on it shapes how we schedule and stage it.

How the work is sequenced

Plants get wet down and covered before anything else happens. Then the appropriate method for the substrate — low pressure with a cleaning solution for siding and roofs, higher pressure only where the material can take it, like concrete. Then a full rinse from the top down so nothing dries with residue on it.

Where it usually goes wrong

High pressure on wood siding drives water behind the boards and raises the grain, which then needs sanding before it can take a coating. On asphalt shingle it strips granules and shortens the roof's life. The pressure setting is the whole skill — anyone can point a wand at a wall.

How long it takes

Most houses are a single day. If the wash is prep for painting, the surface then needs 48 hours minimum to dry before anything gets coated, and longer on north elevations that never see direct sun.

Our Work

Recent Work

Failing clapboard paint down to bare wood before preparation
Exterior paint failure across clapboard before scraping and priming
Pressure washing a cape exterior before repainting
Our Work

Before & After

Drag the handle to compare

Three-family exterior restoration — before Three-family exterior restoration — after Before After

Three-family exterior restorationCornice and bay-window brackets had failed with rusted flashing behind them. Carpentry repaired first, then the full envelope prepped and refinished.

Common Questions

Questions We Get Asked

How long after washing before you paint in Belmont?

48 hours minimum, 72 on shaded or north-facing elevations. We check with a moisture meter rather than going by feel — coating damp siding is the fastest way to a failed paint job.

Will pressure damage my siding?

It can, which is why old wood and painted surfaces get soft washed at low pressure with a cleaning solution instead. High pressure is for concrete.

Can I have washing done without painting?

Yes, plenty of people do. Annual washing removes the mildew and salt film that shortens the life of whatever coating is already on there.
Get Started

Ready for Your Pressure Washing Service Estimate in Belmont?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now