Pressure Washing Service — Mission Hill, Boston MA

Pressure Washing Service in Mission Hill, Boston MA

Nothing gets coated in Mission Hill before it's washed and dry. Proximity to Northeastern and the Longwood medical area means high turnover and hard wear on interiors. Paint does not bond to mildew, chalk or salt film.

Services

Pressure Washing Service Services in Mission Hill

House Washing in Mission Hill

Siding, trim and foundations — Removes the mildew, pollen and road salt that paint will not bond over.. If you want the detail, here's how we handle house washing in Mission Hill.

Deck Cleaning in Mission Hill

Wash and brighten before staining — Wash, then wood brightener to open the grain and pull the grey out. Stain applied over a dirty deck fails early.. If you want the detail, here's how we handle deck cleaning in Mission Hill.

Driveway Cleaning in Mission Hill

Concrete, brick and pavers — Surface cleaner rather than a wand, so there's no striping across the slab.. If you want the detail, here's how we handle driveway cleaning in Mission Hill.

Soft Washing in Mission Hill

Older wood, painted surfaces and roofing — Low pressure with a cleaning solution instead of blasting. The right call on anything fragile.. If you want the detail, here's how we handle soft washing in Mission Hill.

Rest of what we do in Mission Hill: Start from the Mission Hill overview.

More on this trade generally: Pressure Washing across our service area.

Why Aura

A Family Business, Not a Call Centre

You deal with the people doing the work. We are Allston-based, we hold Massachusetts HIC licence #193121, and we carry full liability and workers' compensation cover.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Mission Hill

We measure on site and put the number in writing.

(617) 777-7700 Call Now Request Online
On the Ground in Mission Hill, Boston

What Pressure Washing Work Here Actually Involves

Three-deckers and brick rowhouses from the 1890s through the 1910s, with Queen Anne detail on the Triangle blocks and institutional buildings toward Brigham Circle.

Most of our pressure washing work here is for landlords running student and hospital-worker rentals, plus owner-occupants restoring in the Triangle.

Mission Hill Triangle

A designated architectural conservation district under the Boston Landmarks Commission, covering some of the best-preserved Queen Anne rows in the city.

Genuine grade

Parker Hill is steep. Ladder footing and staging on a sloped street is a safety question before it's a scheduling one.

Student and medical rentals

Proximity to Northeastern and the Longwood medical area means high turnover and hard wear on interiors.

How Washing Work Is Approached

Soft Wash, Pressure Wash, and Which One Your Surface Needs

What drives the price

Access and surface type set the price. A single-storey ranch is straightforward. Three storeys of shingle with landscaping tight to the foundation needs different equipment, more setup and more protection of what is underneath. In Mission Hill, Boston specifically, the work is mostly hillside three-deckers, and the Mission Hill Triangle district shapes how we schedule and stage it.

How the work is sequenced

Plants get wet down and covered before anything else happens. Then the appropriate method for the substrate — low pressure with a cleaning solution for siding and roofs, higher pressure only where the material can take it, like concrete. Then a full rinse from the top down so nothing dries with residue on it.

Where it usually goes wrong

High pressure on wood siding drives water behind the boards and raises the grain, which then needs sanding before it can take a coating. On asphalt shingle it strips granules and shortens the roof's life. The pressure setting is the whole skill — anyone can point a wand at a wall.

How long it takes

Most houses are a single day. If the wash is prep for painting, the surface then needs 48 hours minimum to dry before anything gets coated, and longer on north elevations that never see direct sun.

Our Work

Recent Work

House washing ahead of exterior painting
Pressure washing a cape exterior before repainting
Shingle side elevation of a three-decker after full repaint
Our Work

Before & After

Drag the handle to compare

Three-family exterior restoration — before Three-family exterior restoration — after Before After

Three-family exterior restorationCornice and bay-window brackets had failed with rusted flashing behind them. Carpentry repaired first, then the full envelope prepped and refinished.

Common Questions

Questions We Get Asked

How long after washing before you paint in Mission Hill?

48 hours minimum, 72 on shaded or north-facing elevations. We check with a moisture meter rather than going by feel — coating damp siding is the fastest way to a failed paint job.

Will pressure damage my siding?

It can, which is why old wood and painted surfaces get soft washed at low pressure with a cleaning solution instead. High pressure is for concrete.

Can I have washing done without painting?

Yes, plenty of people do. Annual washing removes the mildew and salt film that shortens the life of whatever coating is already on there.
Get Started

Ready for Your Pressure Washing Service Estimate in Mission Hill, Boston?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now