Drywall Contractor — Scituate, MA

Drywall Contractor in Scituate, MA

Wall surfaces in Scituate are mostly what the original builders put up. A lot of Scituate is cedar shingle, which behaves differently to clapboard and often wants a penetrating finish rather than a film. We match the substrate rather than skimming compound over it and hoping.

Services

Drywall Contractor Services in Scituate

Drywall Repair in Scituate

Holes, cracks and damaged board — Patched, taped, mudded in coats with real dry time between, textured to match, then primed.. If you want the detail, here's how we handle drywall repair in Scituate.

Plaster Repair in Scituate

Original lath-and-plaster walls — Plaster needs compatible materials, not drywall compound smeared over it, or the repair shows through the paint.. If you want the detail, here's how we handle plaster repair in Scituate.

Ceiling Repair in Scituate

Cracks, water damage and sagging — Source of the water gets confirmed first. Then remove, replace, texture-match and stain-block.. If you want the detail, here's how we handle ceiling repair in Scituate.

Popcorn Ceiling Removal in Scituate

Textured ceiling removal and skim coat — Pre-1980 texture gets tested before anything is scraped. Then skim smooth, prime and paint.. If you want the detail, here's how we handle popcorn ceiling removal in Scituate.

Rest of what we do in Scituate: Start from the Scituate overview.

More on this trade generally: Drywall & Plaster across our service area.

Why Aura

A Family Business, Not a Call Centre

You deal with the people doing the work. We are Allston-based, we hold Massachusetts HIC licence #193121, and we carry full liability and workers' compensation cover.

Benjamin Moore and Sherwin-Williams products
Two-year workmanship warranty

Estimates in Scituate

We measure on site and put the number in writing.

(617) 777-7700 Call Now Request Online
On the Ground in Scituate

What Drywall & Plaster Work Here Actually Involves

Shingle-style and cottage-form houses along the shore, antique colonials inland, and postwar and newer homes through the middle of town.

Most of our drywall & plaster work here is for coastal homeowners who have learned the hard way that exterior maintenance here is a shorter cycle.

Direct storm exposure

Minot, Sand Hills, Humarock and Cedar Point take northeasters head on. Coating life on exposed elevations is dramatically shorter than inland.

Salt and fastener corrosion

Salt attacks coatings and fasteners together. Exterior carpentry needs stainless or hot-dipped fasteners or the repair fails before the finish does.

Wind-driven rain

Rain arrives sideways here. Caulk joints, end grain and window heads are the first failures and need checking every cycle.

How Wall and Ceiling Work Is Priced

Drywall, Plaster and the Difference Between Them

What drives the price

The number is driven by finish level and access, not area. A patch in a closet is quick. The same patch on a nine-foot ceiling under raking light from a window has to be feathered wide enough that no seam catches the light, and that is a different job. Older plaster work costs more than drywall because matching an existing texture takes skill that new board does not. In Scituate specifically, the work is mostly shore-side shingle houses and inland colonials, and some of the harshest salt exposure in Massachusetts shapes how we schedule and stage it.

How the work is sequenced

Cut back to sound material, back the repair so it is not floating, tape, then three coats of compound each wider than the last, sanding between. Then prime — always prime — because bare compound and painted wall absorb differently and the difference shows through the finish as flashing.

Where it usually goes wrong

The failure we see most is a patch that was sanded flat but never primed, so it reads as a dull patch through the topcoat. The second is compound applied too thick in one pass, which cracks as it shrinks. Three thin coats beat one heavy one every time, and there is no shortcut around the drying time between them.

How long it takes

Small patches are same-day plus a return for sanding and paint. Whole-ceiling work and plaster restoration run several days because each compound coat has to dry fully before the next one goes on.

Our Work

Recent Work

Painter working a corridor in an occupied building
Colonial exterior and brick walkway after completion
Exterior paint failure across clapboard before scraping and priming
Our Work

Before & After

Drag the handle to compare

Apartment building corridor — before Apartment building corridor — after Before After

Apartment building corridorOccupied building, worked in sequence so residents kept access throughout. Walls, ceiling, chair rail and doors.

Common Questions

Questions We Get Asked

Can you repair and paint the same day in Scituate?

Rarely. Compound shrinks as it dries and each coat needs real time — 24 hours in normal conditions, longer in summer humidity. Rushing it puts a hairline ring through your finish coat within weeks.

Why does my crack keep coming back?

Because the substrate is still moving and the repair only bridged the surface. Proper taping and feathering, or on plaster a compatible base coat, is what actually stops it.

Will the patch be visible under paint?

Not if it is textured to match and primed. Unprimed compound absorbs differently to the surrounding wall and flashes through the finish.
Get Started

Ready for Your Drywall Contractor Estimate in Scituate?

We walk the property, measure it, and send a written itemised quote — normally inside 24 hours. No pressure, no obligation.

Call (617) 777-7700 Send a Message

Licensed #193121  ·  Fully insured  ·  2-year workmanship warranty

Call Now